Meet the maker: Matsuura Mugen (松浦無元)

Matsuura Mugen (松浦無元) is a Japanese potter, born 1944 in Hagi, Yamaguchi, and founder of the Shōunzan-gama (松雲山窯) kiln, active since 1980. Trained in the tradition of Living National Treasure Miwa Kyūwa, he works in wood-fired Hagi-yaki, one of Japan's most historic tea ceramic traditions. His kiln continues today under his son and successor, Matsuura Dōshin.

Hagi-yaki natsu-jawan by Matsuura Mugen, Shōunzan-gama kiln

Who was Matsuura Mugen (松浦無元)?

Matsuura Mugen was born in Hagi, Yamaguchi, in 1944. In 1974 he began his training in pottery, following in the tradition of the late Miwa Kyūwa, 10th generation Miwa Kyūsetsu and a holder of Japan's Living National Treasure designation for Hagi ware. In 1979 he built his own potter's wheel, kiln, and wood-burning noborigama climbing kiln, founding his own workshop, Shōunzan-gama, in the Nakanokura district of Hagi, on the same ground where the founders of Hagi-yaki first built their kilns centuries earlier. The kiln's first firing took place on an auspicious day in August 1980, the same year he held his first solo exhibition, in Tokyo.

In the years that followed, Mugen travelled to study historic kiln sites and tea ceramics from the Momoyama period in Iga, Shigaraki, Shino, and Bizen, research that shaped how he approached form as much as glaze. He continued to exhibit widely: solo exhibitions in Niigata, Yokohama, Kanazawa, and Aomori through the 1980s and early 1990s, selection for the Asia Seven Countries Contemporary Art Exhibition, and a place in the Tabe Museum's Tea Ceremony Art Exhibition in 1993. In 1994 an exhibition in Hagi titled Twenty Years in This Path marked two decades of his work with a hundred selected tea ceramics. He continued to exhibit through the Hagi Ceramic Artists Association into the 2000s and 2010s, including at the 400th anniversary exhibition of the founding of Hagi in 2004, and was selected for the Japan Ceramic Society Exhibition as recently as 2020.

Since 2008, Mugen's son, Matsuura Dōshin, born in Hagi in 1975 and trained at the Department of Design at Tōa University before studying under his father, has worked alongside him, and continues Shōunzan-gama today as its second generation.


What sets his work apart

Mugen's tea ceramics carry the quiet, unforced warmth associated with the Miwa Kyūwa lineage, favouring restraint over ornament. His noborigama is wood fired, which means the kiln itself has a say in the outcome: ash falls unevenly, heat moves differently through each chamber, and no two pieces from the same firing ever come out quite alike.

One material he is particularly known for working with is beni-hagi, "red Hagi", a warmer, rose-toned variation of the traditional pale Hagi glaze that depends on a specific local clay increasingly difficult to source. Pieces made with it are considered notable within his output for that reason alone. His larger vessels, vases and jars in particular, are also recognised for a distinctive shinogi ridge pattern carved into the surface before firing, a technique the kiln describes as uniquely its own.


How to recognise a genuine piece

  • Pieces from Shōunzan-gama are signed on the tomobako storage box rather than stamped directly onto the ceramic body itself.

  • The signature reads 無元 (Mugen), typically accompanied by a square red seal containing the character 無, and a closing character read as 造 (zō, "made by"). The kiln name, Shōunzan (松雲山), often appears alongside the maker's signature, sometimes in a separate inscription describing the piece itself.

  • Genuine documentation from the kiln, when included, takes the form of a printed shiori card giving the kiln name, the workshop's designation as a registered Hagi-yaki noborigama kiln, and a Hagi address and telephone number.

As with many Japanese tea ceramics, individual boxes can also carry a separate, more personal inscription in flowing cursive script, sometimes a poetic name (mei) given to that specific piece.


Signatures of Matsuura Mugen in our archive


Meet the Matsuura Mugen chawan in collection


About Hagi ware

Hagi-yaki comes from Hagi, a small coastal city in Yamaguchi Prefecture, where Korean potters settled in the late 16th century and began a tradition that Japanese tea masters have ranked second only to Raku ware for four centuries, in the old saying ichi Raku, ni Hagi, san Karatsu, "first Raku, second Hagi, third Karatsu." Fired at relatively low temperatures in a wood-burning noborigama climbing kiln, Hagi clay stays soft and porous, and the glaze develops a fine network of crackle called kan'nyū. Over years of use, tea seeps into that crackle and slowly darkens it, a transformation tea practitioners call nanabake, the seven changes. Few ceramic traditions in Japan are so openly designed to change in the hands of their owner.

→ Want to know more about how to care for Hagi ware? Read the care guide for Hagi-yaki here.
→ Curious about the wider Hagi tradition? Read the full story in the journal.


Sources

  • Physical examination of the seal, construction, and any award stickers on the pieces themselves

  • Information shared by dealers and specialists in Japan at the time of purchase

  • Official kiln website: Shōunzan-gama, About, including Matsuura Mugen's full published ceramic history (陶歴)

  • Japanese Wikipedia entry on Hagi ware (萩焼), for general historical and technical context on the tradition.


Browse all tea ceremony items


Next
Next

Meet the maker: Seiju Kon